How to unlock a natural tank

When the water in the bathtub flows to an eternity or worse, it remains decidedly blocked, it is time to intervene. Rather than immediately using aggressive chemicals, why not opt for natural methods? In this article, we will explore simple and ecological solutions to unlock a tank, using ingredients that you probably already have at hand.

The causes of the blockade

Before immersing yourself in the solutions, it is important to understand what generally causes blockage into the tubes of a tank: limestone, hair, soap residues and bathroom deposits can accumulate over time, causing obstacles.

Preparations

Before starting, be sure to bring together the necessary equipment. Protective gloves are recommended and it can be wise to protect the area around the tank to avoid splashes and any escape.

The different natural methods to unlock a bathtub

Whatever the method, what we are trying to do is a mechanical action, the goal is to disinterest the solidified materials that have accumulated and frozen inside the pipes.

Sodium bicarbonate, vinegar and coarse salt

Take a liter of hot water, put from one to two tablespoons of liquid to wash in the air, then mix. Pour the water into the hole, then leave to act for a few minutes (from 3 to 5 minutes), then put in the hole half a glass of coarse salt and half a glass of baking soda, pour over a glass of vinegar. Leave to rest for about 30 minutes. The chemical reaction that occurs will help to remove residues. Then rinse abundantly with hot water. The purpose of salt is to create chemical and mechanical actions.

Vinegar and salt

Mix half a cup of salt with half a cup of vinegar. Pour this mixture into the bathroom hole in the bathtub and leave to act for about 20 minutes. The rinse with hot water ends.

Boiling water

This method is particularly effective for the obstacles caused by soap residues. Slowly pour the boiling water into the tube to dissolve the residues. Repeat if necessary.

The suction cup

If the above methods do not work, try using a suction cup to create pressure that can remove obstruction.

The ferret

You can also remove the hair using a wire of metal in a sheath with a crank at one end and the other end a thorn -shaped tip. This tool is called furetto and is often used by plumbers to unlock all types of pipes.

To unlock a bathtub with a ferret, it is very simple: the corkscrew to the drain pipe is introduced, the wire is made until it is blocked by the cap. Take the crank and run it, which will run the mouth -shaped tip that will penetrate the mouth that clings and hang there. So you pull the thread and thus brought out the residues that blocked the tank.

A variant of the ferret is the metal hook. It is up to a metal hook, make a hook to one of its ends, then insert it as deep as possible in the tube, then go up. It is likely to have hung residues. Repeat the operation until the duct is involved.

How to make your bathtub never clogged

To avoid future problems, the solution is simple: invest in a hair filter you put on the evacuation of your tank. Then clean the filter regularly while removing the hair and hair that came to fix it.

The use of a tank can be an easy and ecological task with the right methods. By adopting these natural solutions, you can save money by preserving the environment. The next time the bathtub will show the block marks, do not hesitate to try one or more of these simple and effective suggestions. The planet and your bathtub will be grateful to you.